Tên bài báo:

Artificial Intelligence Approaches for Prediction of Compressive Strength of Geopolymer Concrete
Tác giả:
Đào Văn Đông
Tham gia cùng:
Phạm Thái Bình
Trịnh Hoàng Sơn
Lý Hải Bằng
Tạp chí:
Năm xuất bản:
Từ trang 1 đến trang 17
Lĩnh vực:
Kỹ thuật xây dựng công trình giao thông
Phạm vi:
Quốc tế

Tóm tắt:

Geopolymer concrete (GPC) has been used as a partial replacement of Portland cement concrete (PCC) in various construction applications. In this paper, two artificial intelligence approaches, namely adaptive neuro fuzzy inference (ANFIS) and artificial neural network (ANN), were used to predict the compressive strength of GPC, where coarse and fine waste steel slag were used as aggregates. The prepared mixtures contained fly ash, sodium hydroxide in solid state, sodium silicate solution, coarse and fine steel slag aggregates as well as water, in which four variables (fly ash, sodium hydroxide, sodium silicate solution, and water) were used as input parameters for modeling. A total number of 210 samples were prepared with target-specified compressive strength at standard age of 28 days of 25, 35, and 45 MPa. Such values were obtained and used as targets for the two AI prediction tools. Evaluation of the model’s performance was achieved via criteria such as mean absolute error (MAE), root mean square error (RMSE), and coefficient of determination (R2). The results showed that both ANN and ANFIS models have strong potential for predicting the compressive strength of GPC but ANFIS (MAE = 1.655 MPa, RMSE = 2.265 MPa, and R2 = 0.879) is better than ANN (MAE = 1.989 MPa, RMSE = 2.423 MPa, and R2 = 0.851). Sensitivity analysis was then carried out, and it was found that reducing one input parameter could only make a small change to the prediction performance

Từ khóa:

geopolymer concrete compressive strength adaptive network-based fuzzy inference system sensitivity analysis
Thông tin tác giả
Đào Văn Đông

Đào Văn Đông

Phó Giáo sư / Tiến sỹ kỹ thuật

Lý lịch khoa học